High-mast outdoor lighting applications are one area-lighting technology in which LEDs have struggled to find success with fixtures mounted at 100 ft or higher. Ewo, however, has installed its led street light fixture Manufacturer floodlights in such an application on the apron of the Munich Airport (FMG) after first trialing solid-state lighting (SSL) technology at the airport two years ago.
The airport installation turned to LEDs to both slash energy costs and to provide better quality lighting. The prior high-pressure sodium (HPS) lights rendered colors poorly, as is common with all HPS lights. Low CRI is not an issue in many outdoor applications, but the airport wanted lights that could boost safety.
"Assuring the safety of our passengers, planes and their crew, airport staff, and any other visitor is a priority at Munich Airport," said Günther Sellmeier, planning and project manager for exterior lighting and engineering and facilities at FMG. Ewo did not reveal the actual CRI of the lights, but the Cree XT-E LEDs used in the fixtures have a minimum CRI of 70 and are offered at higher CRIs. HPS lights have a typical CRI in the range of 25. The higher CRI makes it far easier for equipment operators to see workers and other obstacles.
The airport projects a minimum of 50% energy savings with the new lights. That will equate to an annual reduction of 122,000 kWh and a reduction of 70 tons of carbon emissions.
The project chronology shows how led street light wholesale are evolving and how long some SSL projects take to come to fruition. We first reported on the story in February 2012 when Ewo tested LED lights on two of the high-mast poles. Initially the lights delivered 46% energy savings. The final installation used newer Cree LEDs, and delivered better performance.
Slowly LEDs are catching on in high-mast applications. Last June we covered a freeway project in Maine in which Acuity supplied Holophane HMAO luminaires. At the time the Maine Department of Transportation said that the cost and weight of LED products had hampered the use of SSL in the application. Earlier, Cooper Lighting announced a high-mast project in Idaho.
Still, there are lighting professionals who think other light-source technologies may be most suitable for high-mast lighting. In an article on the 2012 Street and Area Lighting Conference over on our Illumination in Focus website, we covered a project at the Port of Oakland, California where Luxim LEP (light-emitting plasma) sources were determined the best match for a major retrofit of HPS fixtures.
more info you can visit:http://www.lead-lighting.com/products/sid107-1.htm
Friday, August 29, 2014
Thursday, August 28, 2014
Lattice Power gets cash infusion to support GaN-on-Si LED development
Lattice Power has regularly claimed that it has commercially launched gallium-nitride-on-silicon (GaN-on-Si) cree xsp series led street light although solid-state lighting (SSL) products using such LEDs have been hard to find on the market. But the China- based company has received a significant cash infusion to pursue the Si substrate technology that could deliver much lower cost in the backend of the LED manufacturing process. Venture investors Asia Pacific Resources Development Investment, GSR Ventures, Mayfield Fund, and Crescent HydePark have led an investment round totaling $ 80 million.
The company said the new funding would be utilized to expand R & D and manufacturing operations and finance the expected growth in sales. The company cited the development of Si-based LEDs for mobile flash-photo applications in smartphones and tablets as one of the factors that lead to the new funding.
"LatticePower's commercial GaN-on-Silicon LED technology has provided us the opportunity to be on the leading edge of the green revolution and an overnight leader in the LED market: mobile, auto and general lighting," said Dr. Min Wang, CEO of LatticePower. "This new round of funding will allow us build the necessary scale to be competitive in this fast-evolving and growing market and enable the company to meet the growing demand for our industry-leading products from an expanding customer base across the globe. "
Lattice Power said back in 2012 that it was the first company in volume production of GaN-on-Si LEDs. But to date, there is no evidence in the general-lighting market that any of the Si-centric players have dented the commercial market .
Plessey recently added a metal-organic chemical-vapor deposition (MOCVD) reactor to presumably boost its manufacturing capacity. That company has sold Si-based LEDs in low volumes even through distribution. The company's most recent LED announcement was for a blue-pump LED that could be used in remote phosphor applications.
Toshiba is also pursuing Si-based led street light supplier using technology that was originally acquired from Bridgelux. The company announced its second-generation GaN-on-Si LEDs last October. The company also showed a flip-chip version of an Si-based LED at the Light + Building trade fair.
Clearly, however, the investors believe that Lattice Power, and what the company says is a portfolio of more than 200 global patents, will make an impact in LED lighting. In addition the company plans a global expansion. "The company will leverage its proprietary technology to build a global network of R & D teams, starting by integrating a Korean and Taiwanese team in 2014 and expanding to build a US R & D and manufacturing center by 2015, "said Sonny Wu, LatticePower executive chairman." LatticePower will revolutionize the lighting industry. "
more info you can visit:http://www.lead-lighting.com/products/sid107-1.htm
The company said the new funding would be utilized to expand R & D and manufacturing operations and finance the expected growth in sales. The company cited the development of Si-based LEDs for mobile flash-photo applications in smartphones and tablets as one of the factors that lead to the new funding.
"LatticePower's commercial GaN-on-Silicon LED technology has provided us the opportunity to be on the leading edge of the green revolution and an overnight leader in the LED market: mobile, auto and general lighting," said Dr. Min Wang, CEO of LatticePower. "This new round of funding will allow us build the necessary scale to be competitive in this fast-evolving and growing market and enable the company to meet the growing demand for our industry-leading products from an expanding customer base across the globe. "
Lattice Power said back in 2012 that it was the first company in volume production of GaN-on-Si LEDs. But to date, there is no evidence in the general-lighting market that any of the Si-centric players have dented the commercial market .
Plessey recently added a metal-organic chemical-vapor deposition (MOCVD) reactor to presumably boost its manufacturing capacity. That company has sold Si-based LEDs in low volumes even through distribution. The company's most recent LED announcement was for a blue-pump LED that could be used in remote phosphor applications.
Toshiba is also pursuing Si-based led street light supplier using technology that was originally acquired from Bridgelux. The company announced its second-generation GaN-on-Si LEDs last October. The company also showed a flip-chip version of an Si-based LED at the Light + Building trade fair.
Clearly, however, the investors believe that Lattice Power, and what the company says is a portfolio of more than 200 global patents, will make an impact in LED lighting. In addition the company plans a global expansion. "The company will leverage its proprietary technology to build a global network of R & D teams, starting by integrating a Korean and Taiwanese team in 2014 and expanding to build a US R & D and manufacturing center by 2015, "said Sonny Wu, LatticePower executive chairman." LatticePower will revolutionize the lighting industry. "
more info you can visit:http://www.lead-lighting.com/products/sid107-1.htm
Walmart plans major LED transition in supercenter lighting globally
Retailer Walmart has a goal to reduce the power it uses per square foot of floor space by 20% before the year 2020. Moving to reach the goal, the company has announced that it will install new led outdoor lighting wholesale in many of its largest supercenter stores across the US, Asia, the UK, and Latin America. GE Lighting will supply a variety of solid-state lighting (SSL) fixtures for the initiative, including the Lumination IS Series for the ceiling lighting that is the energy largest consumer in a supercenter store .
Indeed, Walmart said that the lighting for the main sales floor in a store accounts for 90% of the total energy used in the building. The retailer has already had relatively efficient fluorescent lighting in many stores, including state-of-the-art T5 fluorescent technology in some instances. Still, GE says the Lumination IS Series uses less energy than the best fluorescent products, and the savings from the transition will range from 15-60% based on the legacy lighting installed in stores in different regions.
Walmart and LEDs
"LEDs have become an integral part of our energy-efficiency model for our stores and play a key role in achieving our overall sustainability goals," said Doug McMillon, president and CEO of Wal-Mart Stores, Inc. "Just as important, the energy cost savings coming from these innovations will help us maintain the low prices our customers depend on us to provide. "
GE and Walmart have a long history partnering on LED lighting projects with GE supplying LED-based freezer case lights to the retailer starting in 2005. Walmart was also a pioneer of LED use in parking lots, working with the US Department of Energy on a project back in 2009.
More recently, Walmart and GE worked together on LED lighting for the first all-LED-lit supercenter that opened last October in South Euclid, Ohio. That project validated the performance of the Lumination IS products for ceiling lighting. "We have worked to find and scale energy-efficient LED lighting solutions that are cost effective and high quality, and now working with GE, we're paving the way to make this a mainstream solution for the retail industry, "added McMillon.
GE formally introduced the Lumination IS Series this past January. The linear pendant design is intended to provide an indirect lighting effect for ambient needs by directing light from an LED commercial lighting wholesale engine into linear reflectors.
Roll-out plans
The installation of supercenter lighting will begin this month in the Asda-branded stores that Walmart operates in the US. The initial plans will include 10 new stores in the UK, 30 new stores in the US, 37 new stores in Mexico, 24 new stores and 16 store retrofit projects in China, 10 new stores in Central America, and 30 store retrofit projects in Brazil.
The US projects will serve as a baseline for energy efficiency due to the fact that the typical US Walmart supercenter has relatively efficient fluorescent lighting. Indeed, the partners project savings in the US to be in the 15% range. Still, the actual savings are a staggering 340,000 kWh annually per store, or $ 34,000 at $ 10.13 / kWh. In other regions the savings will fall in the 40-60% range. And all of the regions will benefit from maintenance savings.
"We've had a long and successful relationship with Walmart, increasing our environmental efforts together," said Jeff Immelt, GE chairman and CEO. "A leader in seeking energy efficiency in the retail industry, Walmart's energy-conscious focus allows the company to attain a substantial cost savings in electricity. We value our longstanding relationship with Walmart and are proud to work with them in reducing their environmental impact. "
more info you can visit:http://www.lighting-ledlight.com/index.php/tag/led-commercial-lighting-wholesale/
Indeed, Walmart said that the lighting for the main sales floor in a store accounts for 90% of the total energy used in the building. The retailer has already had relatively efficient fluorescent lighting in many stores, including state-of-the-art T5 fluorescent technology in some instances. Still, GE says the Lumination IS Series uses less energy than the best fluorescent products, and the savings from the transition will range from 15-60% based on the legacy lighting installed in stores in different regions.
Walmart and LEDs
"LEDs have become an integral part of our energy-efficiency model for our stores and play a key role in achieving our overall sustainability goals," said Doug McMillon, president and CEO of Wal-Mart Stores, Inc. "Just as important, the energy cost savings coming from these innovations will help us maintain the low prices our customers depend on us to provide. "
GE and Walmart have a long history partnering on LED lighting projects with GE supplying LED-based freezer case lights to the retailer starting in 2005. Walmart was also a pioneer of LED use in parking lots, working with the US Department of Energy on a project back in 2009.
More recently, Walmart and GE worked together on LED lighting for the first all-LED-lit supercenter that opened last October in South Euclid, Ohio. That project validated the performance of the Lumination IS products for ceiling lighting. "We have worked to find and scale energy-efficient LED lighting solutions that are cost effective and high quality, and now working with GE, we're paving the way to make this a mainstream solution for the retail industry, "added McMillon.
GE formally introduced the Lumination IS Series this past January. The linear pendant design is intended to provide an indirect lighting effect for ambient needs by directing light from an LED commercial lighting wholesale engine into linear reflectors.
Roll-out plans
The installation of supercenter lighting will begin this month in the Asda-branded stores that Walmart operates in the US. The initial plans will include 10 new stores in the UK, 30 new stores in the US, 37 new stores in Mexico, 24 new stores and 16 store retrofit projects in China, 10 new stores in Central America, and 30 store retrofit projects in Brazil.
The US projects will serve as a baseline for energy efficiency due to the fact that the typical US Walmart supercenter has relatively efficient fluorescent lighting. Indeed, the partners project savings in the US to be in the 15% range. Still, the actual savings are a staggering 340,000 kWh annually per store, or $ 34,000 at $ 10.13 / kWh. In other regions the savings will fall in the 40-60% range. And all of the regions will benefit from maintenance savings.
"We've had a long and successful relationship with Walmart, increasing our environmental efforts together," said Jeff Immelt, GE chairman and CEO. "A leader in seeking energy efficiency in the retail industry, Walmart's energy-conscious focus allows the company to attain a substantial cost savings in electricity. We value our longstanding relationship with Walmart and are proud to work with them in reducing their environmental impact. "
more info you can visit:http://www.lighting-ledlight.com/index.php/tag/led-commercial-lighting-wholesale/
Philips launches SlimStyle BR30 lamps with mid-power LEDs
Philips Lighting has announced the SlimStyle BR30 LED retrofit lamp that can deliver similar light output to a 65W incandescent bulb in flood-lighting applications. The new lamp uses Philips Lumileds mid-power LED panel lighting fixture to deliver 650 lm, and Philips has suggested a retail price of $ 12.97 for the lamp that certainly undercuts the current marketplace for such products.
Philips launches SlimStyle BR30 lamps with mid-power LEDs
Philips launched the A-19 SlimStyle omnidirectional lamp last December, also establishing an industry low price point at that time for a 60W-equivalent lamp. That product features a very visible design in which mid-power LEDs are placed around the outer circumference of a flat paddle-like structure. While the design looks quite a lot different from a conventional bulb, it delivers omnidirectional performance.
The challenge in a BR30 lamp is quite different in that the beam needs to be cast primarily in one direction. But Philips apparently has been able to use a similar light engine to the one developed for the A-19 lamp, albeit with LEDs mounted on only one side of the structure and radiating in a forward direction.
The resulting BR30 lamp looks more traditional from the front of the radiating surface. But as the nearby photo illustrates, the lamp does not rely on the traditional reflecting chamber. Indeed, the lamp neck is very narrow and there is no evident heat sink. As with the case of the A-19 lamp, the mid-power LEDs do not produce excessive heat and the light engine design conducts away the heat that is generated without the need for a bulky and evident heat sink.
The new BR30 lamp consumes just 9.5W, and Philips said that the product will save consumers $ 152 in energy costs over the life time of the product. The product is rated for 25,000 hours of use and what Philips says is 25 times the lifespan of legacy BR30 lamps. Of course, the savings and impact of long life will depend on application. Many BR30 lamps are used in applications such as downlights where the lamps get usage that matches or exceeds that of the typical A-lamp. Conversely, some flood lights are only sporadically used and rarely need replacement.
In any case, the LED panel lighting Manufacturer has truly come in at a price point that could change the market when Philips delivers the product in July. Cree, for example, launched an LED-based BR30 lamp mid-2013 with similar performance specifications. Retailer Home Depot is currently selling that product for $ 19.97.
"Over the last four years, Philips has led the charge in making LED bulbs more affordable for consumers, while ensuring that we continue to innovate with every new generation of offerings and the SlimStyle BR30 is no exception," said Bruno Biasiotta, CEO and president of Philips Lighting Americas. "We continue to demonstrate our commitment to giving consumers value-priced offerings, without compromising on the light quality or features they have come to expect. Moreover, we have one of the most robust rebate programs in the country and continue to work with utilities to ensure that we can further drive down the price and save consumers time and money. "
Philips said that the new BR30 lamp is designed to be Energy Star compliant, although certification will come down the road. Energy Star certification is key to many rebate programs. The SlimStyle A19 lamp received Energy Star certification in April, about four months after introduction.
More info you can visit:http://www.lead-lighting.com/led-panel/led-panel-light-smd3030-series.htm
Philips launches SlimStyle BR30 lamps with mid-power LEDs
Philips launched the A-19 SlimStyle omnidirectional lamp last December, also establishing an industry low price point at that time for a 60W-equivalent lamp. That product features a very visible design in which mid-power LEDs are placed around the outer circumference of a flat paddle-like structure. While the design looks quite a lot different from a conventional bulb, it delivers omnidirectional performance.
The challenge in a BR30 lamp is quite different in that the beam needs to be cast primarily in one direction. But Philips apparently has been able to use a similar light engine to the one developed for the A-19 lamp, albeit with LEDs mounted on only one side of the structure and radiating in a forward direction.
The resulting BR30 lamp looks more traditional from the front of the radiating surface. But as the nearby photo illustrates, the lamp does not rely on the traditional reflecting chamber. Indeed, the lamp neck is very narrow and there is no evident heat sink. As with the case of the A-19 lamp, the mid-power LEDs do not produce excessive heat and the light engine design conducts away the heat that is generated without the need for a bulky and evident heat sink.
The new BR30 lamp consumes just 9.5W, and Philips said that the product will save consumers $ 152 in energy costs over the life time of the product. The product is rated for 25,000 hours of use and what Philips says is 25 times the lifespan of legacy BR30 lamps. Of course, the savings and impact of long life will depend on application. Many BR30 lamps are used in applications such as downlights where the lamps get usage that matches or exceeds that of the typical A-lamp. Conversely, some flood lights are only sporadically used and rarely need replacement.
In any case, the LED panel lighting Manufacturer has truly come in at a price point that could change the market when Philips delivers the product in July. Cree, for example, launched an LED-based BR30 lamp mid-2013 with similar performance specifications. Retailer Home Depot is currently selling that product for $ 19.97.
"Over the last four years, Philips has led the charge in making LED bulbs more affordable for consumers, while ensuring that we continue to innovate with every new generation of offerings and the SlimStyle BR30 is no exception," said Bruno Biasiotta, CEO and president of Philips Lighting Americas. "We continue to demonstrate our commitment to giving consumers value-priced offerings, without compromising on the light quality or features they have come to expect. Moreover, we have one of the most robust rebate programs in the country and continue to work with utilities to ensure that we can further drive down the price and save consumers time and money. "
Philips said that the new BR30 lamp is designed to be Energy Star compliant, although certification will come down the road. Energy Star certification is key to many rebate programs. The SlimStyle A19 lamp received Energy Star certification in April, about four months after introduction.
More info you can visit:http://www.lead-lighting.com/led-panel/led-panel-light-smd3030-series.htm
Elation helps MTV ring in the New Year with EPV762 MH moving head video panels
MTV's star-studded New Years Eve celebration wowed tens of thousands of TV viewers with its high-profile celebrity hosts Snooki and JWoww from Jersey Shore and performances by Ke $ ha, Sean Kingston and Ne-Yo, among others. Broadcast from the Viacom studio at 1515 Broadway and featuring a sparkly dance club theme, "MTV's Club NYE 2013" delivered all the glitter and eye candy one might expect from a production overlooking Times Square on the biggest night of the year, thanks to a unique set design by AWB DESIGN LLC, based in the greater NYC area.
Production designer Anthony Bishop of cree xsp series led street light
created a stunning performance environment, while maintaining the camera-friendliness of the set, through the innovative use of Elation Professional's EPV762 MH moving head LED video panels, supplied by LMG (Nashville). Although the show had a look and feel of "bigness," the studio actually proved to be a very challenging space to work with due to its small size. Its grid height was a mere 11'6 ".
"When you stick six cameras in that studio and shoot it, it becomes all about the grid, and less about looking at where we would traditionally put scenery," said Bishop. The main issue was "how do I have something scenically there that's there when I need it, then goes away and does not interfere (with camera shots in the cramped space). "
Wanting to solve this issue and also create a spectacular club-themed design, Bishop called LMG's Technology Artist Ken Gay, with whom he had collaborated on MTV shows and other projects in the past. "I have always brought LMG to the table because of the respect I have for them. They're a how-can-we-get-the-job-done type of company. They've been around for awhile and have a vast amount of resources and product available to designers that gives us so much freedom. "
LMG recommended the Elation EPV76 MH, a 7.62mm high-resolution rotating LED video panel that has the capability to pan 540 ° and tilt 265 ° just like a moving head light fixture. Measuring a square 19.2 "x 19.2" and very lightweight (53 lbs.), the panels contain 3-in-1 RGB SMD LEDs, which produce 2,000-nit brightness. Each unit features Ethercon in / out for video signal, Powercon in / out for power linkage, and 3-pin and 5-pin DMX inputs for pan / tilt control.
The EPV762 MH panels' full rotating pan / tilt ability gave Bishop just what he was looking for, from both a spatial and design perspective. "When I've got a grid that's hanging down in camera shot or even polluting the upstage LED wall, I've got to be able either to complement it or not compete with it That's where the Elation panels came in as really viable option for us -. because of the rotating heads, "he explained When not contributing to the scenic design, the. panels could be flattened and essentially "rotated out of view."
Equally important, the Elation moving head units also provided the a whole range of creative design options for both Bishop and Lighting Designer Chris Landy -. A "must" for a show that featured five major acts "Of course every band had to have own look . The panels gave us this mobility. For most part we provided content as way to change the set. But we designed it in a way so that we could shoot it differently too. "
Bishop used a total of 22 EPV762 MH panels on the MTV set, and says he would have used more if he had not "run out of room." The panels were rigged as individual units in two basic configurations. "One we created a proscenium arch over the ceiling that could then flatten out and go away. The other way was as vertical columns, which is how I framed for camera the offshoot shots- the diagonal shots, when you're looking at the band on the stage. So when you get those really cool side shots of Ne-Yo singing, the Elation units are right there surrounding his head, used basically as a wing unit. "
With the panels in the proscenium arch, Bishop added, "I did not put them in straight row -. There's two left and right of center I worked with the director Brian Campbell who was shooting the show We had these dancer pods. - the dancers were on underlit decks, and I said, 'You gotta get in there with a steady camera and get those upper shots. I'm giving you all this candy.' Not only could we shoot the Elation units out in a wide shot , we could also make them go like a ceiling panel and get these nice tight upper shots of the dancers with content behind, and that makes good TV We could have a nice soft palette going on -. we could make it hard, or make it soft. "
In addition to the proscenium arch and vertical columns, led street light wholesale was one more way the EPV762 MH panels were used, which proved a real enhancement to the New Years Eve broadcast. On the studio's east side is a wall of windows that faces Times Square, explained Bishop. "We positioned one of the Elation units back side, where we were able to spin it out to the MTV platform in the middle of Times Square and have our show content and the MTV logo in it. This allowed us to get throwbacks from the middle of Times Square back up to the studio window.
"So there were actually three different things we were able to do with the panels. They were definitely a conversation piece," said Bishop. "I can not speak enough about the Elation units. Look what we were able to do with them in a small TV studio set. Then think about what you could do with these moving head units on a tour. From a touring standpoint, I'm definitely going to promote using these units. I have not even touched what I think I can do with them. "
more info you can visit:http://www.lead-lighting.com/products/sid107-1.htm
Production designer Anthony Bishop of cree xsp series led street light
created a stunning performance environment, while maintaining the camera-friendliness of the set, through the innovative use of Elation Professional's EPV762 MH moving head LED video panels, supplied by LMG (Nashville). Although the show had a look and feel of "bigness," the studio actually proved to be a very challenging space to work with due to its small size. Its grid height was a mere 11'6 ".
"When you stick six cameras in that studio and shoot it, it becomes all about the grid, and less about looking at where we would traditionally put scenery," said Bishop. The main issue was "how do I have something scenically there that's there when I need it, then goes away and does not interfere (with camera shots in the cramped space). "
Wanting to solve this issue and also create a spectacular club-themed design, Bishop called LMG's Technology Artist Ken Gay, with whom he had collaborated on MTV shows and other projects in the past. "I have always brought LMG to the table because of the respect I have for them. They're a how-can-we-get-the-job-done type of company. They've been around for awhile and have a vast amount of resources and product available to designers that gives us so much freedom. "
LMG recommended the Elation EPV76 MH, a 7.62mm high-resolution rotating LED video panel that has the capability to pan 540 ° and tilt 265 ° just like a moving head light fixture. Measuring a square 19.2 "x 19.2" and very lightweight (53 lbs.), the panels contain 3-in-1 RGB SMD LEDs, which produce 2,000-nit brightness. Each unit features Ethercon in / out for video signal, Powercon in / out for power linkage, and 3-pin and 5-pin DMX inputs for pan / tilt control.
The EPV762 MH panels' full rotating pan / tilt ability gave Bishop just what he was looking for, from both a spatial and design perspective. "When I've got a grid that's hanging down in camera shot or even polluting the upstage LED wall, I've got to be able either to complement it or not compete with it That's where the Elation panels came in as really viable option for us -. because of the rotating heads, "he explained When not contributing to the scenic design, the. panels could be flattened and essentially "rotated out of view."
Equally important, the Elation moving head units also provided the a whole range of creative design options for both Bishop and Lighting Designer Chris Landy -. A "must" for a show that featured five major acts "Of course every band had to have own look . The panels gave us this mobility. For most part we provided content as way to change the set. But we designed it in a way so that we could shoot it differently too. "
Bishop used a total of 22 EPV762 MH panels on the MTV set, and says he would have used more if he had not "run out of room." The panels were rigged as individual units in two basic configurations. "One we created a proscenium arch over the ceiling that could then flatten out and go away. The other way was as vertical columns, which is how I framed for camera the offshoot shots- the diagonal shots, when you're looking at the band on the stage. So when you get those really cool side shots of Ne-Yo singing, the Elation units are right there surrounding his head, used basically as a wing unit. "
With the panels in the proscenium arch, Bishop added, "I did not put them in straight row -. There's two left and right of center I worked with the director Brian Campbell who was shooting the show We had these dancer pods. - the dancers were on underlit decks, and I said, 'You gotta get in there with a steady camera and get those upper shots. I'm giving you all this candy.' Not only could we shoot the Elation units out in a wide shot , we could also make them go like a ceiling panel and get these nice tight upper shots of the dancers with content behind, and that makes good TV We could have a nice soft palette going on -. we could make it hard, or make it soft. "
In addition to the proscenium arch and vertical columns, led street light wholesale was one more way the EPV762 MH panels were used, which proved a real enhancement to the New Years Eve broadcast. On the studio's east side is a wall of windows that faces Times Square, explained Bishop. "We positioned one of the Elation units back side, where we were able to spin it out to the MTV platform in the middle of Times Square and have our show content and the MTV logo in it. This allowed us to get throwbacks from the middle of Times Square back up to the studio window.
"So there were actually three different things we were able to do with the panels. They were definitely a conversation piece," said Bishop. "I can not speak enough about the Elation units. Look what we were able to do with them in a small TV studio set. Then think about what you could do with these moving head units on a tour. From a touring standpoint, I'm definitely going to promote using these units. I have not even touched what I think I can do with them. "
more info you can visit:http://www.lead-lighting.com/products/sid107-1.htm
GDS works new lighting technology into Hammersmith music venue renovation
There is perhaps one venue whose name is carved deeper than any other in the hearts of every self-respecting British music fan. Opened in 1932 and designed by Robert Cromie in Art Deco style as The Gaumont Palace cinema, it was renamed the Hammersmith Odeon in 1962, later the Hammersmith Apollo and now after an extensive refurbishment that has restored it to its former Art Deco glory, it will be known as the Eventim Apollo. For a certain generation, this Grade 2 listed building has and will always be known as Hammy O. Ziggy Stardust was killed off there, Motorhead would not sleep until they got there and it was there that Thin Lizzy recorded, some would say, much of the greatest live rock album of all time. No matter what age or genre, led high bay light manufacturers remains the ambition of musicians across the world to tread its boards and its future programme attests to the fact that this is a situation that is unlikely to change anytime soon. When GDS were commissioned to work on the refurbishment of the Apollo, it was nothing short of participating in the restoration of what thousands would consider a national monument.
The overall task was one of restoring this magnificent Art Deco building to its former glory. Over the years, the interior of the Apollo had become something of a jaded, dark space and as such, a shadow of its former self. The first phase of the refurbishment involved the front of house areas, including the hallways, staircases and bars.
GDS was invited to join the design team tasked with the restoration. The vision was to work within the fabric of the original 1932 Robert Cromie masterpiece and wherever possible restore the historical fixtures. A collection of historical photographs detailing the Apollo's early splendour provided a template from which to work.
Using the afore-mentioned photographs for reference, GDS managed the manufacture of the new light fittings as well as refurbishing the original 1932 chandeliers. The GDS team fitted new and original fittings with its new RGBW colour changing strip, designed to achieve an even coverage of light throughout, and running at up to 70W per Meter, it easily matched all compact fluorescent benchmarks that were given.
Created specifically for this job the new strip light carries a dedicated white cell (2700K) in order to provide the perfect colour temperature and is now a standard item in the ArcSystem range. In addition to the newly created strip lights, the installation also featured ArcSystem MR 16 fixtures across the foyer.
The installation used a whole DMX universe that exceeded the normal ARC system 64 channel capability. LumenRadio were glad to help by providing an integrated CRMX OEM solution that connected perfectly with the ARC system electronics.
Of critical importance to any refurbishment solution is the need for work to progress quickly and the Apollo was no exception. The work was completed in a nine week turnaround and delivered a complete transformation of the whole space.
GDS chose LumenRadio's CRMX technology on this prestigious project because it was essential to deliver a large number of DMX channels to certain fixtures which could not be cabled. Frame integrity as well as flawless data transfer was an absolute requirement for Hammersmith Apollo and this is one of the many performance areas where CRMX really excels.
"We have worked closely for a number of years with LumenRadio on some of our wireless product ranges. GDS recognises that the combination of reliable wireless, RDM feedback and top quality support offered by LumenRadio is of the highest order and consequently they were the obvious choice for this project. "
"GDS has been a great partner to us for many years, and led high bay light for sale is a joy to work with. We were of course delighted and very proud to work with GDS on this fantastic project. The Eventim Apollo demanded the highest standards and we are confident that LumenRadio perfectly met its requirements in contributing to the restoration of this iconic venue. "
As GDS celebrates its ninth year, the award winning UK manufacturer has become a truly global company, having established an international sales and distribution network in over 40 countries. With seven market-leading brands and a pioneering approach to bespoke projects, GDS continues to innovate . at the forefront of the entertainment, architectural, television and corporate markets From LiteWare, the original battery powered wireless LED up-lighter to the multi-award winning BluesSystem working lights; from CueSystem cue lights to ArcSystem auditorium lighting, GDS continue to create innovative , flexible solutions that have found their way from Broadway to the West End and from Cirque De Soleil to the Olympics.
more info you can visit:http://www.lead-lighting.com/products/sid22-1.htm
The overall task was one of restoring this magnificent Art Deco building to its former glory. Over the years, the interior of the Apollo had become something of a jaded, dark space and as such, a shadow of its former self. The first phase of the refurbishment involved the front of house areas, including the hallways, staircases and bars.
GDS was invited to join the design team tasked with the restoration. The vision was to work within the fabric of the original 1932 Robert Cromie masterpiece and wherever possible restore the historical fixtures. A collection of historical photographs detailing the Apollo's early splendour provided a template from which to work.
Using the afore-mentioned photographs for reference, GDS managed the manufacture of the new light fittings as well as refurbishing the original 1932 chandeliers. The GDS team fitted new and original fittings with its new RGBW colour changing strip, designed to achieve an even coverage of light throughout, and running at up to 70W per Meter, it easily matched all compact fluorescent benchmarks that were given.
Created specifically for this job the new strip light carries a dedicated white cell (2700K) in order to provide the perfect colour temperature and is now a standard item in the ArcSystem range. In addition to the newly created strip lights, the installation also featured ArcSystem MR 16 fixtures across the foyer.
The installation used a whole DMX universe that exceeded the normal ARC system 64 channel capability. LumenRadio were glad to help by providing an integrated CRMX OEM solution that connected perfectly with the ARC system electronics.
Of critical importance to any refurbishment solution is the need for work to progress quickly and the Apollo was no exception. The work was completed in a nine week turnaround and delivered a complete transformation of the whole space.
GDS chose LumenRadio's CRMX technology on this prestigious project because it was essential to deliver a large number of DMX channels to certain fixtures which could not be cabled. Frame integrity as well as flawless data transfer was an absolute requirement for Hammersmith Apollo and this is one of the many performance areas where CRMX really excels.
"We have worked closely for a number of years with LumenRadio on some of our wireless product ranges. GDS recognises that the combination of reliable wireless, RDM feedback and top quality support offered by LumenRadio is of the highest order and consequently they were the obvious choice for this project. "
"GDS has been a great partner to us for many years, and led high bay light for sale is a joy to work with. We were of course delighted and very proud to work with GDS on this fantastic project. The Eventim Apollo demanded the highest standards and we are confident that LumenRadio perfectly met its requirements in contributing to the restoration of this iconic venue. "
As GDS celebrates its ninth year, the award winning UK manufacturer has become a truly global company, having established an international sales and distribution network in over 40 countries. With seven market-leading brands and a pioneering approach to bespoke projects, GDS continues to innovate . at the forefront of the entertainment, architectural, television and corporate markets From LiteWare, the original battery powered wireless LED up-lighter to the multi-award winning BluesSystem working lights; from CueSystem cue lights to ArcSystem auditorium lighting, GDS continue to create innovative , flexible solutions that have found their way from Broadway to the West End and from Cirque De Soleil to the Olympics.
more info you can visit:http://www.lead-lighting.com/products/sid22-1.htm
Tuesday, August 26, 2014
New Decorative Track Lighting from Acuity Brands Adds Character to Any Space
Acuity Brands, Inc. introduces 15 decorative track lighting products from Lithonia Lighting® to enhance room décor and buy led high bay lamps in residential and light commercial spaces. The new track lighting family features a variety of LED and halogen lamped track head fixtures, including eight products compatible with the Acculamp® LED lamp collection.
Acuity Brands' Lithonia Lighting track lighting.
The integrated track kits offer a new level of contemporary flair, while LED lamped track heads help achieve a more traditional look. Halogen track lighting is also available offering a decorative solution for more economical project needs.
"The led high bay light for sale offer superior illumination, are energy efficient and cost effective. Multiple design options give you the flexibility to bring unique lighting design to a space," said Michael Bruce, Lithonia Lighting Senior Product Manager. "From gallery to grocery, boutique to residential, our range of traditional to contemporary styles and finishes make our new decorative track lighting family perfect for a wide variety of installations. "
Each track head is available individually or in a convenient kit. The kits feature three-lamped heads tailored to the customer's specifications, a 4-inch section of track and a floating power track canopy to deliver electricity. Additional track sticks and heads are available to enhance the fixtures using simple connectors and adapters.
More info you can visit:http://www.lead-lighting.com/products/sid22-1.htm
Acuity Brands' Lithonia Lighting track lighting.
The integrated track kits offer a new level of contemporary flair, while LED lamped track heads help achieve a more traditional look. Halogen track lighting is also available offering a decorative solution for more economical project needs.
"The led high bay light for sale offer superior illumination, are energy efficient and cost effective. Multiple design options give you the flexibility to bring unique lighting design to a space," said Michael Bruce, Lithonia Lighting Senior Product Manager. "From gallery to grocery, boutique to residential, our range of traditional to contemporary styles and finishes make our new decorative track lighting family perfect for a wide variety of installations. "
Each track head is available individually or in a convenient kit. The kits feature three-lamped heads tailored to the customer's specifications, a 4-inch section of track and a floating power track canopy to deliver electricity. Additional track sticks and heads are available to enhance the fixtures using simple connectors and adapters.
More info you can visit:http://www.lead-lighting.com/products/sid22-1.htm
AAXA Technologies Releases Smart LED Android Projector
AAXA Technologies is pleased to release the AAXA LED Android Projector. The AAXA LED Android Micro Projector takes the award winning "LED Showtime" platform and introduces an Android 4.2 operating system complete with WIFI connectivity. At the heart of this projector is a next generation cree xsp series led street light optical engine mated to Texas Instrument's DLP imager. LEDs are superior to lamp based projectors by directly injecting red, green, and blue light into the projection engine instead of relying on filtered white light. The result is a more vivid, colorful image and a 20,000 hour life-span - tens times longer than a traditional lamp projector.
Mobile Computing and Streaming Video Platform
The AAXA LED Android Pico Projector incorporates a dual core Android 4.2 processor with 1GB of DDR RAM and 4 Gigabytes of onboard storage. Complete with embedded WIFI the LED Android Projector becomes a full-featured video-streaming projector capable of running apps, streaming movies, accessing e-mail, surfing the web, and more. With the AAXA LED Android Netflix ™, Hulu ™, HBOGo ™ are all available in mobile big-screen format. Additional features include Google Play, document processing, and much much more.
Brilliant 550 Lumen LED Projector
The AAXA LED Android features native 720P (WXGA) resolution powered by a Texas Instruments DLP imager, 20,000 hour LEDs, and a brilliant 550 lumen light-source (with "boost" mode). All this is housed in a micro form-factor measuring just 5.9 "x 5.2" x 1.4 ". The LED Android is a true mini projector capable of producing giant, deep, immersive video streaming, web-browsing, and game-play of up to 160".
A Big Projector in a Micro Projector Size
The AAXA led street light with solar panel Android is a full-featured pocketable mini-computer. A variety of input sources include HDMI and VGA connections, a Composite Video input cable, and a USB memory stick port for media playback. Outputs include a 3.5mm headphone jack and onboard 2 watt speakers. Processing power is provided by a robust dual-core Android processor capable of rendering high resolution full-length movies and high megapixel digital pictures. The AAXA LED Android is a true miniature powerhouse able to perform as a full sized projector while doubling as a stand-alone mini-computer without the need to connect to a video source or game console.
more info you can visit:http://www.lead-lighting.com/products/sid106-1.htm
Mobile Computing and Streaming Video Platform
The AAXA LED Android Pico Projector incorporates a dual core Android 4.2 processor with 1GB of DDR RAM and 4 Gigabytes of onboard storage. Complete with embedded WIFI the LED Android Projector becomes a full-featured video-streaming projector capable of running apps, streaming movies, accessing e-mail, surfing the web, and more. With the AAXA LED Android Netflix ™, Hulu ™, HBOGo ™ are all available in mobile big-screen format. Additional features include Google Play, document processing, and much much more.
Brilliant 550 Lumen LED Projector
The AAXA LED Android features native 720P (WXGA) resolution powered by a Texas Instruments DLP imager, 20,000 hour LEDs, and a brilliant 550 lumen light-source (with "boost" mode). All this is housed in a micro form-factor measuring just 5.9 "x 5.2" x 1.4 ". The LED Android is a true mini projector capable of producing giant, deep, immersive video streaming, web-browsing, and game-play of up to 160".
A Big Projector in a Micro Projector Size
The AAXA led street light with solar panel Android is a full-featured pocketable mini-computer. A variety of input sources include HDMI and VGA connections, a Composite Video input cable, and a USB memory stick port for media playback. Outputs include a 3.5mm headphone jack and onboard 2 watt speakers. Processing power is provided by a robust dual-core Android processor capable of rendering high resolution full-length movies and high megapixel digital pictures. The AAXA LED Android is a true miniature powerhouse able to perform as a full sized projector while doubling as a stand-alone mini-computer without the need to connect to a video source or game console.
more info you can visit:http://www.lead-lighting.com/products/sid106-1.htm
Lunera Lighting Introduces Plug-and-Play LED Replacement for Metal Halide Lamps
A leader in lighting innovations accelerating the transformation to advanced LED technology, today introduced the availability of the Susan Lamp family, adding to Lunera's leading-edge BallastLED lamp product portfolio. Lunera's BallastLED technology has created a new market segment for LED lamps.
Innovative electronics integrated into the lamps enable them to operate directly off of existing ballasts, which make converting to led high bay light price easy and affordable.
The Susan Lamp family obsoletes 400, 250 and175-watt metal halide lamps by bringing high-quality;. Energy-efficient LED light to a broad range of commercial and industrial applications Throughout its 50,000-hour life, the Susan Lamp is designed to eliminate at least four lamp replacement cycles and deliver consistent light levels at a fraction of the power used by a metal halide lamp. Simple to install and valuable to own, the Susan Lamp eliminates the frustrations of rapid lumen depreciation, short life span, and excessive power consumption of the metal halide lamp it replaces.
"Our customers have made it very clear; when it comes to led high bay light for sale, they are looking for products that are simple to install, reliable to operate, and valuable to own Lunera's engineering team has delivered a remarkable innovation with the Susan Lamp The.. elegance of its design makes converting to LED as easy as changing a light bulb, "said Tom Quinn, Lunera vice president of sales and marketing." With our plug-and play approach, we offer the lowest installed cost-per-watt saved of any LED high bay solution available in the market today, "he added.
Meet the Susan Lamp
Two Susan Lamp options are available for each wattage level in the product family. The Susan Lamp Pro is a high-lumen LED lamp, which improves upon the existing light levels while reducing energy consumption by 60 to 70 percent. The Susan Lamp Junior maintains existing light levels but extends the energy savings to 70 to 90 percent.
Turning the Susan Lamp into a Profit Center
Lunera will soon launch Lunera Financing Solutions, an innovative approach to financing, making it possible to convert to the Susan Lamp for no money down and be cash flow positive from day one.
Where to Buy
The Susan Lamp is available through authorized nationwide distributors. Contact Lunera to arrange a demonstration or to locate a distributor near you.
More info you can visit:http://www.lead-lighting.com/products/sid22-1.htm
Innovative electronics integrated into the lamps enable them to operate directly off of existing ballasts, which make converting to led high bay light price easy and affordable.
The Susan Lamp family obsoletes 400, 250 and175-watt metal halide lamps by bringing high-quality;. Energy-efficient LED light to a broad range of commercial and industrial applications Throughout its 50,000-hour life, the Susan Lamp is designed to eliminate at least four lamp replacement cycles and deliver consistent light levels at a fraction of the power used by a metal halide lamp. Simple to install and valuable to own, the Susan Lamp eliminates the frustrations of rapid lumen depreciation, short life span, and excessive power consumption of the metal halide lamp it replaces.
"Our customers have made it very clear; when it comes to led high bay light for sale, they are looking for products that are simple to install, reliable to operate, and valuable to own Lunera's engineering team has delivered a remarkable innovation with the Susan Lamp The.. elegance of its design makes converting to LED as easy as changing a light bulb, "said Tom Quinn, Lunera vice president of sales and marketing." With our plug-and play approach, we offer the lowest installed cost-per-watt saved of any LED high bay solution available in the market today, "he added.
Meet the Susan Lamp
Two Susan Lamp options are available for each wattage level in the product family. The Susan Lamp Pro is a high-lumen LED lamp, which improves upon the existing light levels while reducing energy consumption by 60 to 70 percent. The Susan Lamp Junior maintains existing light levels but extends the energy savings to 70 to 90 percent.
Turning the Susan Lamp into a Profit Center
Lunera will soon launch Lunera Financing Solutions, an innovative approach to financing, making it possible to convert to the Susan Lamp for no money down and be cash flow positive from day one.
Where to Buy
The Susan Lamp is available through authorized nationwide distributors. Contact Lunera to arrange a demonstration or to locate a distributor near you.
More info you can visit:http://www.lead-lighting.com/products/sid22-1.htm
New 160 Watt High Intensity LED Flood Light Released by Larson Electronics
Larson Electronics has announced the release of a 160 watt high intensity LED flood light. The LEDL-160W-1227 flood light offers high output from a compact form factor and is ideal for use in mining applications as well as heavy equipment, hunting, boating, vehicle, military, law enforcement and industrial manufacturing uses.
Larson Electronics' new cree xsp series led street light produces 20,500 lumens of high intensity light while drawing only 160 watts from a 120 volt electrical system and can illuminate approximately 40,000 square feet of space. Twenty four single LEDs are arranged in rows and paired with high purity optics to produce a floodlight beam spread to provide more light over a larger area nearer the fixture.
The low amp draw, 50,000 hour service life, and 120-277 volt AC compatibility provides operators with a rugged and powerful LED alternative to 1000 watt halogen lamps that uses little power and can withstand rugged use and abusive conditions.
These LED lights are USCG certified, IP67 waterproof, sealed against intrusion by dust and dirt, and very ruggedly constructed to withstand the most demanding mining environments, conditions and applications. These units can withstand rapid temperature changes of -40 ° C to 80 ° C . The housings are formed from extruded aluminum and the lenses are unbreakable polycarbonate. Each unit is equipped with an adjustable u-bracket trunnion mount. These led street lighting Manufacturer
are recommended for use in applications where a lot of vibration, dust, dirt, dampness, and abusive working conditions are encountered.
"The new LEDL-160W-1227 LED flood lights are ideal replacements for fragile and hot running 1,000 watt halogen lamps," said Rob Bresnahan with Larsonelectronics.com. "They offer a small profile, low power requirements and are more durable than a halogen or HID unit. "
more info you can visit:http://www.lead-lighting.com/products/sid106-1.htm
Larson Electronics' new cree xsp series led street light produces 20,500 lumens of high intensity light while drawing only 160 watts from a 120 volt electrical system and can illuminate approximately 40,000 square feet of space. Twenty four single LEDs are arranged in rows and paired with high purity optics to produce a floodlight beam spread to provide more light over a larger area nearer the fixture.
The low amp draw, 50,000 hour service life, and 120-277 volt AC compatibility provides operators with a rugged and powerful LED alternative to 1000 watt halogen lamps that uses little power and can withstand rugged use and abusive conditions.
These LED lights are USCG certified, IP67 waterproof, sealed against intrusion by dust and dirt, and very ruggedly constructed to withstand the most demanding mining environments, conditions and applications. These units can withstand rapid temperature changes of -40 ° C to 80 ° C . The housings are formed from extruded aluminum and the lenses are unbreakable polycarbonate. Each unit is equipped with an adjustable u-bracket trunnion mount. These led street lighting Manufacturer
are recommended for use in applications where a lot of vibration, dust, dirt, dampness, and abusive working conditions are encountered.
"The new LEDL-160W-1227 LED flood lights are ideal replacements for fragile and hot running 1,000 watt halogen lamps," said Rob Bresnahan with Larsonelectronics.com. "They offer a small profile, low power requirements and are more durable than a halogen or HID unit. "
more info you can visit:http://www.lead-lighting.com/products/sid106-1.htm
Panasonic Introduces Trio of New LED Professional Displays at InfoComm 2014
Panasonic System Communications Company of North America, a leader in delivering professional display and digital signage solutions, today announced several new additions to its industry-leading line of professional displays, including the TH-55LFV70 buy led high bay lamps Wall Display, the TH-47LFX6N Outdoor LED display and an expanded LFE7 LED backlit Display Series. The company is showcasing these new displays, along with other AV solutions, at InfoComm 2014 (booth # C5416).
"As applications for display technology continue to grow, these new additions enable us to deliver a more customized, reliable experience to drive results for our customers, from eye catching digital signage to reliable and stylish conference room solutions"
"As applications for display technology continue to grow, these new additions enable us to deliver a more customized, reliable experience to drive results for our customers, from eye catching digital signage to reliable and stylish conference room solutions," said Art Rankin, Senior Director AV Technologies, Panasonic System Communications Company of North America. "From stunning 4K professional displays to more basic LED displays, we have a display solution to meet the needs of our customers and our customers' customers."
With a 0.14 "(3.5mm) bezel, the 55" TH-55LFV70 LED Video Wall Display creates nearly seamless, vivid images across multiple displays making it ideal for a multitude of rental, command and control and public information applications for use in transportation hubs , retail centers, corporate lobbies and more.
High Reliability for Mission-Critical Applications: The TH-55LFV70 is embedded with a "Failover and Failback" function which maintains a continuous signal distribution even if some input signals are disrupted by an accidental operational error.
Flexible Installation and Maintenance: The display's L-shaped structure, easy mounting solution and calibration software supports easy and quick installation and adjustment for a multi-display implementation, saving both time and installation costs Additionally, the display uses DIGITAL LINK, a technology based. on HDBaseT ™ technology that reduces cost and complexity of installation by allowing transmission of video, audio and control commands through a single CAT5e cable up to 100 meters. Users can also save adjusted color data in the display's internal memory for quick reinstallation.
High Brightness for Big Impact: The TH-55LFV70 features brightness of 700cd / m² and an IPS Direct-LED backlit LED panel providing a wide viewing angle With an anti-glare surface treatment to reduce reflection of ambient light, high visibility is ensured even. in brightly lit rooms.
Availability: November 2014.
The rugged, high brightness 47 "TH-47LFX6N Professional led high bay light for sale is ideal for outdoor digital signage applications including digital menu boards for Quick Serve Restaurants (QSR) drive thru lanes, outdoor transportation stations as well as a variety of outdoor entertainment venues.
Weatherproof Design: With an IP55-level dust and water resistance, the TH-47LFX6N operates efficiently in harsh environmental conditions such as heat, humidity and extreme cold where a typical display would succumb to the elements The display's built-in air-cooling system. automatically suppresses any temperature rises in the LED panel caused by direct sunlight exposure, thus preventing blackouts and ensuring uninterrupted operation.
High Visibility: The display features a full 1,200 cd / m2 of brightness and a wide IPS viewing angle for high visibility even in direct sunlight from nearly any angle.
Easy Installation and Maintenance: The TH-47LFX6N also uses DIGITAL LINK technology, enabling the transmission of video, audio and control commands through a single CAT5e cable.
Optional Early Warning Software: The display is compatible with preventative ET-SWA100 Series software which monitors the display's status when connected to an intranet, notifying users of any abnormalities in service and thus minimizes potential downtime.
The LFE7 Series of professional LED displays answer a market need for high quality displays at a competitive price for basic digital signage and mid-sized conference room applications. Previously available only as the 65 "TH-65LFE7, the series of full-HD displays now includes the 50 "TH-50LFE7 and 42" TH-42LFE7. These thin bezel displays, with 350 cd / m2 of brightness, bring a sleek look and durable performance for professional use.
Thin Bezel:. Both the TH-50LFE7 and TH-42LFE7 feature a slim bezel measuring only .5 "and depth measurements of only 2.1" (53 mm), and 3.1 "(77 mm), respectively This thin design allows both displays to easily blend into a conference room's aesthetic or capture attention in a digital signage application.
Expandability: These displays contain standard-equipped connection terminals (HDMI x 2, DVI-D, PC-IN), control terminals (RS232C, LAN, IR-IN / OUT), built-in speakers as well as a PC stick terminal for mobile device connectivity.
Flexible Installation: The LFE7 Series includes multi-display functionality (up to a 5x5 video wall configuration) and can be installed in either portrait or landscape mode.
more info you can visit:http://www.lead-lighting.com/products/sid22-1.htm
"As applications for display technology continue to grow, these new additions enable us to deliver a more customized, reliable experience to drive results for our customers, from eye catching digital signage to reliable and stylish conference room solutions"
"As applications for display technology continue to grow, these new additions enable us to deliver a more customized, reliable experience to drive results for our customers, from eye catching digital signage to reliable and stylish conference room solutions," said Art Rankin, Senior Director AV Technologies, Panasonic System Communications Company of North America. "From stunning 4K professional displays to more basic LED displays, we have a display solution to meet the needs of our customers and our customers' customers."
With a 0.14 "(3.5mm) bezel, the 55" TH-55LFV70 LED Video Wall Display creates nearly seamless, vivid images across multiple displays making it ideal for a multitude of rental, command and control and public information applications for use in transportation hubs , retail centers, corporate lobbies and more.
High Reliability for Mission-Critical Applications: The TH-55LFV70 is embedded with a "Failover and Failback" function which maintains a continuous signal distribution even if some input signals are disrupted by an accidental operational error.
Flexible Installation and Maintenance: The display's L-shaped structure, easy mounting solution and calibration software supports easy and quick installation and adjustment for a multi-display implementation, saving both time and installation costs Additionally, the display uses DIGITAL LINK, a technology based. on HDBaseT ™ technology that reduces cost and complexity of installation by allowing transmission of video, audio and control commands through a single CAT5e cable up to 100 meters. Users can also save adjusted color data in the display's internal memory for quick reinstallation.
High Brightness for Big Impact: The TH-55LFV70 features brightness of 700cd / m² and an IPS Direct-LED backlit LED panel providing a wide viewing angle With an anti-glare surface treatment to reduce reflection of ambient light, high visibility is ensured even. in brightly lit rooms.
Availability: November 2014.
The rugged, high brightness 47 "TH-47LFX6N Professional led high bay light for sale is ideal for outdoor digital signage applications including digital menu boards for Quick Serve Restaurants (QSR) drive thru lanes, outdoor transportation stations as well as a variety of outdoor entertainment venues.
Weatherproof Design: With an IP55-level dust and water resistance, the TH-47LFX6N operates efficiently in harsh environmental conditions such as heat, humidity and extreme cold where a typical display would succumb to the elements The display's built-in air-cooling system. automatically suppresses any temperature rises in the LED panel caused by direct sunlight exposure, thus preventing blackouts and ensuring uninterrupted operation.
High Visibility: The display features a full 1,200 cd / m2 of brightness and a wide IPS viewing angle for high visibility even in direct sunlight from nearly any angle.
Easy Installation and Maintenance: The TH-47LFX6N also uses DIGITAL LINK technology, enabling the transmission of video, audio and control commands through a single CAT5e cable.
Optional Early Warning Software: The display is compatible with preventative ET-SWA100 Series software which monitors the display's status when connected to an intranet, notifying users of any abnormalities in service and thus minimizes potential downtime.
The LFE7 Series of professional LED displays answer a market need for high quality displays at a competitive price for basic digital signage and mid-sized conference room applications. Previously available only as the 65 "TH-65LFE7, the series of full-HD displays now includes the 50 "TH-50LFE7 and 42" TH-42LFE7. These thin bezel displays, with 350 cd / m2 of brightness, bring a sleek look and durable performance for professional use.
Thin Bezel:. Both the TH-50LFE7 and TH-42LFE7 feature a slim bezel measuring only .5 "and depth measurements of only 2.1" (53 mm), and 3.1 "(77 mm), respectively This thin design allows both displays to easily blend into a conference room's aesthetic or capture attention in a digital signage application.
Expandability: These displays contain standard-equipped connection terminals (HDMI x 2, DVI-D, PC-IN), control terminals (RS232C, LAN, IR-IN / OUT), built-in speakers as well as a PC stick terminal for mobile device connectivity.
Flexible Installation: The LFE7 Series includes multi-display functionality (up to a 5x5 video wall configuration) and can be installed in either portrait or landscape mode.
more info you can visit:http://www.lead-lighting.com/products/sid22-1.htm
Cooper Lighting Introduces the Next Generation LED LightBAR System
Cooper Lighting has announced it has upgraded its outdoor LED LightBAR technology. Internally developed at Cooper Lighting's accredited state-of-the-art LED Innovation Center and integrated in multiple product lines, the new system's unmatched optical performance delivers improved lumen output and efficiency, while continuing to offer up to 75% in energy savings over traditional High Intensity Discharge (HID) led street light wholesale sources.
Designed to meet today's demanding energy and environmental needs, Cooper Lighting's LightBAR technology features the company's patented AccuLED Optics, which sets the industry benchmark for reliable photometric performance, scalability and energy efficiency. The system's unique application-specific design allows lumen and energy output to be customized to fulfill the exact needs of the outdoor space - eliminating wasted energy and obtrusive spill light Designed for both new construction applications or to replace inefficient luminaires, the next generation LightBAR technology is available in two versions (7 LEDs and 21 LEDs),. three standard color options (3000K, 4000K and 6000K correlated color temperatures (CCT)), and offered in 13 different optical distributions, providing versatility for every outdoor need, including street lighting, area / site, floodlighting, wall mount, parking garage, canopy and pathway solutions.
The updated LightBAR technology offers an increase in efficiency in all optical distributions without degrading optical performance, lumen depreciation or lumens per watt (lm / W). Boasting more task lumens per watt, the high efficiency 21 LED LightBAR optical fixtures deliver up to 100 lm / W or 2400 lumens per LightBAR, which outperforms the original 21 LED LightBAR fixture (1800 lumens) by 600 lumens - (using the same number of AccuLED Optics) -, while the 7 LED LightBAR optical choice (1900 lumens) also increases its lumen output over the original 21 LED LightBAR.
The efficiency and performance improvement roadmaps of LED technology guarantee the availability of improved lm / W packages in the future. To address future retrofits of higher performing packages, Cooper's unique LightBAR design is backwards compatible or future-proof both electrically and thermally, meaning there are no changes to the driver or the heat sink, making future LED upgrade replacements to its fixtures simple.
Cooper Lighting also expanded the color options to include a 3000K and 6000K CCT as standard in addition to the preferred color choice, warm white color of 4000K CCT. While typical led street light fixture Manufacturer are standardized on a cold blue color temperature (6000-6500K CCT) , Cooper Lighting LightBAR-equipped fixtures, by comparison, provide specifiers and end-users a desired color choice.
Cooper Lighting's LightBAR technology provides energy savings between 30-75% over standard HID systems while also providing a 50,000+ hour rated life-six times longer than the traditional metal halide sources found in most outdoor commercial applications.
The LightBAR technology, integrated into the industry's leading portfolio of outdoor product lines represented across four of Cooper Lighting's company brands - Invue, McGraw-Edison, Lumark and Streetworks, - offers lighting solutions that qualify for many local utility rebates.
more info you can visit:http://www.lead-lighting.com/products/sid108-1.htm
Designed to meet today's demanding energy and environmental needs, Cooper Lighting's LightBAR technology features the company's patented AccuLED Optics, which sets the industry benchmark for reliable photometric performance, scalability and energy efficiency. The system's unique application-specific design allows lumen and energy output to be customized to fulfill the exact needs of the outdoor space - eliminating wasted energy and obtrusive spill light Designed for both new construction applications or to replace inefficient luminaires, the next generation LightBAR technology is available in two versions (7 LEDs and 21 LEDs),. three standard color options (3000K, 4000K and 6000K correlated color temperatures (CCT)), and offered in 13 different optical distributions, providing versatility for every outdoor need, including street lighting, area / site, floodlighting, wall mount, parking garage, canopy and pathway solutions.
The updated LightBAR technology offers an increase in efficiency in all optical distributions without degrading optical performance, lumen depreciation or lumens per watt (lm / W). Boasting more task lumens per watt, the high efficiency 21 LED LightBAR optical fixtures deliver up to 100 lm / W or 2400 lumens per LightBAR, which outperforms the original 21 LED LightBAR fixture (1800 lumens) by 600 lumens - (using the same number of AccuLED Optics) -, while the 7 LED LightBAR optical choice (1900 lumens) also increases its lumen output over the original 21 LED LightBAR.
The efficiency and performance improvement roadmaps of LED technology guarantee the availability of improved lm / W packages in the future. To address future retrofits of higher performing packages, Cooper's unique LightBAR design is backwards compatible or future-proof both electrically and thermally, meaning there are no changes to the driver or the heat sink, making future LED upgrade replacements to its fixtures simple.
Cooper Lighting also expanded the color options to include a 3000K and 6000K CCT as standard in addition to the preferred color choice, warm white color of 4000K CCT. While typical led street light fixture Manufacturer are standardized on a cold blue color temperature (6000-6500K CCT) , Cooper Lighting LightBAR-equipped fixtures, by comparison, provide specifiers and end-users a desired color choice.
Cooper Lighting's LightBAR technology provides energy savings between 30-75% over standard HID systems while also providing a 50,000+ hour rated life-six times longer than the traditional metal halide sources found in most outdoor commercial applications.
The LightBAR technology, integrated into the industry's leading portfolio of outdoor product lines represented across four of Cooper Lighting's company brands - Invue, McGraw-Edison, Lumark and Streetworks, - offers lighting solutions that qualify for many local utility rebates.
more info you can visit:http://www.lead-lighting.com/products/sid108-1.htm
Microsemi Unveils Revolutionary Driver for LED Street Light Fixtures
Microsemi Corporation unveiled a new LED driver designed specifically for North American street light installations. The efficient LXMG221D-0700040-D2F ™ LED driver eliminates bulky step-down transformers typically used in street light fixtures in these markets, providing a single-step conversion from 347VAC or 480VAC down to less than 57VDC as typically required by LED fixtures. This allows manufacturers to design lighter fixtures, which can lower product development and transportation costs. Unique features include integrated fault detection and management functionality which enable operators to respond more quickly to light fixture failures.
According to estimates from industry analyst firm Strategies Unlimited, the LED street and area lighting market in 2010 was $ 327 million. The market is expected to increase at a compound annual unit growth rate of approximately 26 percent from 2010 to 2015. North America, Europe and China lead in the deployment of LED lighting technology.
"The deployment of high-performance solid state lighting fixtures is accelerating and customers are beginning to benefit from the improved efficiency and longer lifetimes these products deliver," stated Roger Holliday, vice president of Marketing for Microsemi's Analog Mixed Signal Group. "Microsemi's leadership in power conversion and light management, combined with our analog mixed-signal design expertise and unique supply chain setup, is why fixture manufacturers globally are choosing us as their lighting solutions technology partner. "
"LED commercial lighting industry often represent one of the highest operating expenses for municipalities because of electricity, maintenance and replacement costs," said Irene Signorino, director of Marketing for Microsemi's Analog Mixed Signal Group. "LEDs help solve this issue by minimizing energy consumption and reducing replacement frequency. If dimming and thermal protection are supported in conjunction with the elimination of the step-down transformer losses as in our new driver, operating costs can be decreased even further. "
In Canada and in the United States, power is often distributed to an outdoor lighting fixture at 347V or 480V. The fixture must then convert the power to much lower voltages (often less than 60V in the US) to properly drive the LED. Until now , this conversion was accomplished using bulky and inefficient step-down transformers. Microsemi's LXMG221D-0700040-D2F eliminates the need for these transformers, accomplishing the voltage conversion in one step. In addition, since multiple power supplies can be used in a modular fashion, many models of street lights (40W, 80W and more) are supported.
Undetected and unreported non-functioning Europe led street light Manufacturer are a key issue for municipalities responsible for the illumination of public areas. Microsemi's new LED driver includes fault detection and management capabilities, which can allow operators to address this issue and respond more quickly to light fixture failures.
more info you can visit:http://www.lead-lighting.com/products/sid107-1.htm
According to estimates from industry analyst firm Strategies Unlimited, the LED street and area lighting market in 2010 was $ 327 million. The market is expected to increase at a compound annual unit growth rate of approximately 26 percent from 2010 to 2015. North America, Europe and China lead in the deployment of LED lighting technology.
"The deployment of high-performance solid state lighting fixtures is accelerating and customers are beginning to benefit from the improved efficiency and longer lifetimes these products deliver," stated Roger Holliday, vice president of Marketing for Microsemi's Analog Mixed Signal Group. "Microsemi's leadership in power conversion and light management, combined with our analog mixed-signal design expertise and unique supply chain setup, is why fixture manufacturers globally are choosing us as their lighting solutions technology partner. "
"LED commercial lighting industry often represent one of the highest operating expenses for municipalities because of electricity, maintenance and replacement costs," said Irene Signorino, director of Marketing for Microsemi's Analog Mixed Signal Group. "LEDs help solve this issue by minimizing energy consumption and reducing replacement frequency. If dimming and thermal protection are supported in conjunction with the elimination of the step-down transformer losses as in our new driver, operating costs can be decreased even further. "
In Canada and in the United States, power is often distributed to an outdoor lighting fixture at 347V or 480V. The fixture must then convert the power to much lower voltages (often less than 60V in the US) to properly drive the LED. Until now , this conversion was accomplished using bulky and inefficient step-down transformers. Microsemi's LXMG221D-0700040-D2F eliminates the need for these transformers, accomplishing the voltage conversion in one step. In addition, since multiple power supplies can be used in a modular fashion, many models of street lights (40W, 80W and more) are supported.
Undetected and unreported non-functioning Europe led street light Manufacturer are a key issue for municipalities responsible for the illumination of public areas. Microsemi's new LED driver includes fault detection and management capabilities, which can allow operators to address this issue and respond more quickly to light fixture failures.
more info you can visit:http://www.lead-lighting.com/products/sid107-1.htm
Xeleum Announces New LED Stairwell Light Fixtures
Xeleum Lighting today announced the introduction of its new Athena Series Stairwell LED Light Fixture. outdoor LED Street Light 200w for use in stairwells that may be unoccupied for long periods of time, it automatically provides 100% light levels only when the space is occupied and dims to a power saving level of approximately 20% when the space is unoccupied. The combined use of occupancy sensors and LED lighting makes possible dramatic reductions in energy consumption, with savings of up to 85% over conventional stairwell fixtures that do not employ these two features.
Mehrdad Ghalebi, President of Xeleum stated that "among the unique features of this product is the emergency battery back-up system which is built directly into the fixture. Developing this fixture from the ground up allowed us to fully integrate the electronics with the lighting and battery systems, thereby achieving far superior overall performance at a cost significantly less than approaches based upon simply combining existing components.
Additional features include vandal-resistant construction and electroluminescent tape recharge capability. Installation is simplified because the fixture is self-contained, without the need for external sensors. Available in two foot and four foot lengths, the use of LEDs ensure many years of maintenance- free operation without ever having to change a bulb.
The Athena Series Stairwell LED Street Light 200w price is UL 924 rated, NFPA compliant, FCC certified and in conformance with DOE rulings pertaining to ASHRAE 90.1-2010, Section 9.4.16 (g). Input power is 30 watts in full-on mode and 6 watts in dimmed mode.
more info you can visit:http://www.lead-lighting.com/led-street-light/led-street-light-200w.htm
Mehrdad Ghalebi, President of Xeleum stated that "among the unique features of this product is the emergency battery back-up system which is built directly into the fixture. Developing this fixture from the ground up allowed us to fully integrate the electronics with the lighting and battery systems, thereby achieving far superior overall performance at a cost significantly less than approaches based upon simply combining existing components.
Additional features include vandal-resistant construction and electroluminescent tape recharge capability. Installation is simplified because the fixture is self-contained, without the need for external sensors. Available in two foot and four foot lengths, the use of LEDs ensure many years of maintenance- free operation without ever having to change a bulb.
The Athena Series Stairwell LED Street Light 200w price is UL 924 rated, NFPA compliant, FCC certified and in conformance with DOE rulings pertaining to ASHRAE 90.1-2010, Section 9.4.16 (g). Input power is 30 watts in full-on mode and 6 watts in dimmed mode.
more info you can visit:http://www.lead-lighting.com/led-street-light/led-street-light-200w.htm
LED Light Panel Announces Fast Lead Times
LED Light Panel, one of world's largest producers of custom sized quality LED light panels and light boxes, has announced their fast lead time for producing their high quality custom lighting products. They boast a turn around time of as little as 7 to 10 days, which places them far ahead of the competition, which often relies on cheap overseas components. This comes as good news to companies around the world seeking the highest quality light panels and LED light boxes for commercial lighting solutions.
In most cases, customers can expect to receive their custom light panel or light box orders usually in less than seven days. led outdoor lighting wholesale is dedicated to leading the industry in production-to-delivery time to maximize convenience and better meet the needs of their clientele. The fast lead time is part of the company's goal of providing every customer unparalleled support and service.
Over the last several years, LED Light Panel has gained notoriety in the commercial lighting industry through their commitment to innovation and superior craftsmanship. They have been well sought after by multiple industries for their product's seamless and uniform backlighting capabilities. Their patented technology has allowed them to custom build extremely large panels (up to 60 "x 118") with even illumination. Cheaply designed and manufactured large panels are infamously plagued by unsightly hot spots.
Industry experts attribute LED Light Panel's success in part to the high quality of their components. They utilize superior LM80 SMD LEDs and 2oz copper PCB for improved heat dissipation from the LEDs. They use 6mm Light Guides to allow their panels to produce significantly more light than their competitors. And they take their tech a step further, by implementing an anodized aluminum heat sink to further dissipate heat from the SMD LEDs.
In addition to large panels, they can custom make light panels as small as 3 "x 3", to fit customer's unique specifications. Their panels are available in 12V and 24V. Dimming works with 1 ~ 10V, PWM, DALI and DMX and covers an enormous range of color temperatures from 2700k to 6500K. Their panels and light boxes are designed to be energy efficient and reduce green house emissions.
As a dominant force in the commercial lighting industry, LED Light Panel is devoted to offering the highest quality light panel and LED commercial lighting wholesale box solutions to companies everywhere. Their light panels and boxes can be seen at Chase Banks, Nikon Camera displays, and at various airports around the world. LED Light Panel is proud of their fast lead time, and they look forward to continuing to best serve their customers and surpass industry standards.
More info you can visit:http://www.lighting-ledlight.com/index.php/tag/led-commercial-lighting-wholesale/
In most cases, customers can expect to receive their custom light panel or light box orders usually in less than seven days. led outdoor lighting wholesale is dedicated to leading the industry in production-to-delivery time to maximize convenience and better meet the needs of their clientele. The fast lead time is part of the company's goal of providing every customer unparalleled support and service.
Over the last several years, LED Light Panel has gained notoriety in the commercial lighting industry through their commitment to innovation and superior craftsmanship. They have been well sought after by multiple industries for their product's seamless and uniform backlighting capabilities. Their patented technology has allowed them to custom build extremely large panels (up to 60 "x 118") with even illumination. Cheaply designed and manufactured large panels are infamously plagued by unsightly hot spots.
Industry experts attribute LED Light Panel's success in part to the high quality of their components. They utilize superior LM80 SMD LEDs and 2oz copper PCB for improved heat dissipation from the LEDs. They use 6mm Light Guides to allow their panels to produce significantly more light than their competitors. And they take their tech a step further, by implementing an anodized aluminum heat sink to further dissipate heat from the SMD LEDs.
In addition to large panels, they can custom make light panels as small as 3 "x 3", to fit customer's unique specifications. Their panels are available in 12V and 24V. Dimming works with 1 ~ 10V, PWM, DALI and DMX and covers an enormous range of color temperatures from 2700k to 6500K. Their panels and light boxes are designed to be energy efficient and reduce green house emissions.
As a dominant force in the commercial lighting industry, LED Light Panel is devoted to offering the highest quality light panel and LED commercial lighting wholesale box solutions to companies everywhere. Their light panels and boxes can be seen at Chase Banks, Nikon Camera displays, and at various airports around the world. LED Light Panel is proud of their fast lead time, and they look forward to continuing to best serve their customers and surpass industry standards.
More info you can visit:http://www.lighting-ledlight.com/index.php/tag/led-commercial-lighting-wholesale/
Larson Electronics Releases High Output Three Lamp Hazardous Location Lighting Fluorescent Fixture
Magnalight has announced the release of a corrosion resistant three lamp fluorescent fixture designed to provide high output and explosion proof approved safety in locations where flammable gases and vapors are encountered during operations. The HALP-48-3L Hazardous Area Fluorescent Light Fixture is multi-voltage capable, provides more light than standard two lamp fixtures, and is specifically designed to withstand wet and corrosive conditions within environments deemed as hazardous locations.
The Magnalight HALP-48-3L hazardous area fluorescent light provides operators in hazardous locations with a powerful and corrosion resistant lighting solution producing more output than standard two LED panel lighting wholesale fixtures for applications where strong illumination is critical to safe and productive operations. This three lamp fixture features a glass fiber reinforced polyester housing that is both lightweight and highly durable as well as impervious to the effects of corrosion, making it well suited to wet marine conditions where salt water can wreak havoc on fixtures constructed of metal. The lens cover is an acrylic diffuser type that seals to the housing with a poured in silicone gasket and stainless steel latches, adding further durability and protection against wet conditions. The lamp assembly consists of three, 4 foot long, T5HO fluorescent tubes for high output and efficiency. Most traditional explosion proof fluorescent fixtures offer either two or four fluorescent tubes; this fixture on the other hand offers an excellent compromise between fixture size and increased output by providing three tubes, yet far more output than a standard two lamp fixture The fixture easily mounts with included flat surface. mounting flanges with a simple through hole mounting flange design that allows operators to simply screw or bolt the fixture to any flat surface. This explosion proof light fixture is also multi-voltage capable for added versatility and can be run with voltages of 120V-60hz, 220V-50hz, 240V-60hz, and 277V-60hz. Output for this fixture totals out at 15,000 lumens, with a color temperature of 5,000k for excellent color rendering and contrasting that is ideal for close work and detail oriented tasks. HAZLOC approvals include a T4A temp rating, Class 1 Division 2 approval, UL 1598A Marine Type compliance, and California Title 24 compliance. The HALP-48-3L explosion proof fixture is ideally suited to wet locations and offshore operations such as drilling platforms where protection against the corrosive effects of salt water and the threat of fire and explosions from exposure to flammable gases and vapors is required.
"The HALP-48-3L was designed to handle marine environments with their wet and corrosive conditions," said Rob Bresnahan with Larson Electronics' Magnalight.com. "Producing up to 15,000 lumen, operators requiring fixtures for damp locations will find the HALP- 48-3L a good match for petrochemical facilities, processing plants and marine loading docks. "
Larson LED panel lighting Manufacturer a full range of industrial and commercial lighting equipment, fluorescent work lights, industrial grade explosion proof lighting, and intrinsically safe LED work lights. To view the entire Larson Electronics line of industrial grade lighting solutions, visit them on the web at Magnalight .com. You can also call 1-800-369-6671 to learn more about all of Larson Electronics' lighting products or call 1-214-616-6180 for international inquires.
more info you can visit:http://www.lead-lighting.com/led-panel/led-panel-light-smd3030-series.htm
The Magnalight HALP-48-3L hazardous area fluorescent light provides operators in hazardous locations with a powerful and corrosion resistant lighting solution producing more output than standard two LED panel lighting wholesale fixtures for applications where strong illumination is critical to safe and productive operations. This three lamp fixture features a glass fiber reinforced polyester housing that is both lightweight and highly durable as well as impervious to the effects of corrosion, making it well suited to wet marine conditions where salt water can wreak havoc on fixtures constructed of metal. The lens cover is an acrylic diffuser type that seals to the housing with a poured in silicone gasket and stainless steel latches, adding further durability and protection against wet conditions. The lamp assembly consists of three, 4 foot long, T5HO fluorescent tubes for high output and efficiency. Most traditional explosion proof fluorescent fixtures offer either two or four fluorescent tubes; this fixture on the other hand offers an excellent compromise between fixture size and increased output by providing three tubes, yet far more output than a standard two lamp fixture The fixture easily mounts with included flat surface. mounting flanges with a simple through hole mounting flange design that allows operators to simply screw or bolt the fixture to any flat surface. This explosion proof light fixture is also multi-voltage capable for added versatility and can be run with voltages of 120V-60hz, 220V-50hz, 240V-60hz, and 277V-60hz. Output for this fixture totals out at 15,000 lumens, with a color temperature of 5,000k for excellent color rendering and contrasting that is ideal for close work and detail oriented tasks. HAZLOC approvals include a T4A temp rating, Class 1 Division 2 approval, UL 1598A Marine Type compliance, and California Title 24 compliance. The HALP-48-3L explosion proof fixture is ideally suited to wet locations and offshore operations such as drilling platforms where protection against the corrosive effects of salt water and the threat of fire and explosions from exposure to flammable gases and vapors is required.
"The HALP-48-3L was designed to handle marine environments with their wet and corrosive conditions," said Rob Bresnahan with Larson Electronics' Magnalight.com. "Producing up to 15,000 lumen, operators requiring fixtures for damp locations will find the HALP- 48-3L a good match for petrochemical facilities, processing plants and marine loading docks. "
Larson LED panel lighting Manufacturer a full range of industrial and commercial lighting equipment, fluorescent work lights, industrial grade explosion proof lighting, and intrinsically safe LED work lights. To view the entire Larson Electronics line of industrial grade lighting solutions, visit them on the web at Magnalight .com. You can also call 1-800-369-6671 to learn more about all of Larson Electronics' lighting products or call 1-214-616-6180 for international inquires.
more info you can visit:http://www.lead-lighting.com/led-panel/led-panel-light-smd3030-series.htm
New Versatile High Power LED Boat Light Proves to be an Energy Efficient Alternative to Halogen Lights
The LEDPB10W-120X2E LED Boat Light from Magnalight.com provides boaters with a high output lighting option that uses less power than halogen lamps while providing more light. Built to withstand the corrosive and abusive effects of the marine environment, this LED light bar produces over 10,000 lumens of clean white light while using only 120 watts of power.
The LEDPB10W-120X2E LED boat light is an ideal alternative for boaters looking to improve the efficiency as well as performance of their onboard lighting systems. Producing 10,320 lumens while using only 120 watts at 10 amps, this LED light bar produces more light output than three 50 watt halogen spreader lights combined, yet uses less power. This high output and efficient operation allows boaters to replace their existing lights with fewer led street light wholesale using less power, thus greatly reducing the drain on their power reserves that lighting represents. Designed for extreme conditions , the LEDPB10W-120X2E is built with a heavy duty extruded aluminum housing and sealed polycarbonate lens for excellent resistance to the effects of impacts, vibrations, and damaging environmental conditions. These high power marine lights are IP68 rated waterproof to 3 meters of submersion, making them impervious to the constant water spray and heavy rains associated with marine applications. This light bar is also compact in size, with two rows of LEDs in a stacked configuration to allow easier mounting in locations where space is limited such as on canopies or along the rooflines of bridges. Despite its small size, this led street lighting fixture produces an impressive 10,320 lumens of light while consuming only 120 watts and 10 amps of current. For comparison, three 50 watt halogen spreader lights would only produce approximately 2,550 lumens, yet would use 150 watts and 12-14 amps of current. This boat light is also versatile and is fitted with advanced LED drivers which allow users to connect dimmers or pulse controllers to provide dimming or flashing operation if desired. These LED boat lights include adjustable aluminum mounting blocks with rubber isolators and stainless steel hardware for improved stability, vibration protection, and resistance to the corrosive effects of salt water. These lights can be operated from any voltage ranging from 9 to 48 VDC, making them ideal for boats as well as vehicles, heavy equipment , ATVs, and anywhere a rugged and powerful lighting solution that will not cause excessive power consumption is desired.
More info you can visit:http://www.lead-lighting.com/products/sid108-1.htm
The LEDPB10W-120X2E LED boat light is an ideal alternative for boaters looking to improve the efficiency as well as performance of their onboard lighting systems. Producing 10,320 lumens while using only 120 watts at 10 amps, this LED light bar produces more light output than three 50 watt halogen spreader lights combined, yet uses less power. This high output and efficient operation allows boaters to replace their existing lights with fewer led street light wholesale using less power, thus greatly reducing the drain on their power reserves that lighting represents. Designed for extreme conditions , the LEDPB10W-120X2E is built with a heavy duty extruded aluminum housing and sealed polycarbonate lens for excellent resistance to the effects of impacts, vibrations, and damaging environmental conditions. These high power marine lights are IP68 rated waterproof to 3 meters of submersion, making them impervious to the constant water spray and heavy rains associated with marine applications. This light bar is also compact in size, with two rows of LEDs in a stacked configuration to allow easier mounting in locations where space is limited such as on canopies or along the rooflines of bridges. Despite its small size, this led street lighting fixture produces an impressive 10,320 lumens of light while consuming only 120 watts and 10 amps of current. For comparison, three 50 watt halogen spreader lights would only produce approximately 2,550 lumens, yet would use 150 watts and 12-14 amps of current. This boat light is also versatile and is fitted with advanced LED drivers which allow users to connect dimmers or pulse controllers to provide dimming or flashing operation if desired. These LED boat lights include adjustable aluminum mounting blocks with rubber isolators and stainless steel hardware for improved stability, vibration protection, and resistance to the corrosive effects of salt water. These lights can be operated from any voltage ranging from 9 to 48 VDC, making them ideal for boats as well as vehicles, heavy equipment , ATVs, and anywhere a rugged and powerful lighting solution that will not cause excessive power consumption is desired.
More info you can visit:http://www.lead-lighting.com/products/sid108-1.htm
Thursday, August 14, 2014
Vishay Semiconductor Expands IR LED Production Capacity with AIXTRON MOCVD System
Vishay Semiconductor, Heilbronn, has acquired an MOCVD system from AIXTRON to expand its infrared cree xsp series led street light production capacities. The company aims to substantially extend its product portfolio in this area. The system was delivered to Vishay at the end of March.
“We opted for AIXTRON’s planetary reactor, as it deposits high-quality layers and offers very high production stability, long operating times, and high throughput rates. Not only that, AIXTRON will support us with process expertise, thus enabling us to rapidly and efficiently expand our gallium arsenide-based infrared LED production”, commented Heinz Nather, Senior Vice President OPTO Division at Vishay Semiconductor.
“We are delighted to have convinced Vishay Semiconductor, one of the world’s leading producers of semiconductors and power electronics, with our range of technologies and services”, remarked Frank Schulte, Vice President of AIXTRON Europe. “We have great expectations of our ongoing cooperation with Vishay.”
led street light with solar panel in Heilbronn forms part of Vishay Intertechnology. With more than 22,000 employees and sales of almost US$ 2.5 billion, this international electronics group based in Malvern, Pennsylvania, U.S., is one of the world’s largest manufacturers of discrete semiconductor elements (diodes, rectifiers, transistors, optoelectronic components, integrated circuits) and passive electronic components .
more info you can visit:http://www.lead-lighting.com/products/sid106-1.htm
“We opted for AIXTRON’s planetary reactor, as it deposits high-quality layers and offers very high production stability, long operating times, and high throughput rates. Not only that, AIXTRON will support us with process expertise, thus enabling us to rapidly and efficiently expand our gallium arsenide-based infrared LED production”, commented Heinz Nather, Senior Vice President OPTO Division at Vishay Semiconductor.
“We are delighted to have convinced Vishay Semiconductor, one of the world’s leading producers of semiconductors and power electronics, with our range of technologies and services”, remarked Frank Schulte, Vice President of AIXTRON Europe. “We have great expectations of our ongoing cooperation with Vishay.”
led street light with solar panel in Heilbronn forms part of Vishay Intertechnology. With more than 22,000 employees and sales of almost US$ 2.5 billion, this international electronics group based in Malvern, Pennsylvania, U.S., is one of the world’s largest manufacturers of discrete semiconductor elements (diodes, rectifiers, transistors, optoelectronic components, integrated circuits) and passive electronic components .
more info you can visit:http://www.lead-lighting.com/products/sid106-1.htm
UK Boroughs and Counties Vamp Up LED Streetlight Investments
Over the past week, rising streetlight costs have led to several UK counties announcements of overhauling inefficient streetlights with more energy efficient LED streetlights. The total number of streetlights to be retrofitted by two boroughs and one council is expected to reach 50,420.
The Poole Council for instance recently announced plans of spending £10 million (US $16.80 million) to replace 17,420 streetlights in a town in Dorset over a period of six years, according to a BBC report. The council expects the new streetlights, which will be turned on the whole night instead of being switched off between midnight to 6:00 Am in the initial proposal, LED panel lighting wholesale will save £20 million in energy costs over a period of 30 years. To complete the project, the council has even approved a streetlight retrofit bank loan.
Other boroughs in UK also have plans of scaling up LED streetlight replacements. The Wokingham Borough Council announced the unanimous approval of investing £11.6 million in new streetlights to cut energy bills, according to a Getreading report. While the Poole Council reported energy bills having doubled over the last decade, Wokingham Borough Council authorities noted streetlight costs have amounted to £600,000 in 2013. An estimated 16,000 streelights will be retrofitted throughout the council, and the council claims at the end of 20 years, the new LED streetlights will be able to save the council £14 million.
Not to be left out, the Thurrock Council recently announced plans of taking a £ 6 million bank loan to overhaul 17,000 streetlights with LEDs, according to a Thurrock Gazette report.
Rising energy costs and LED streetlights lower maintenance costs were the common cited reasons behind UK city councils embrace of LED panel lighting Manufacturer technology. Some cities in UK have chosen to switch off streetlights during certain periods in the night, such as Essex, but as Thurrock Council noted it is not really an option if night time street safety is to be taken into consideration.
more info you can visit:http://www.lead-lighting.com/led-panel/led-panel-light-smd3030-series.htm
The Poole Council for instance recently announced plans of spending £10 million (US $16.80 million) to replace 17,420 streetlights in a town in Dorset over a period of six years, according to a BBC report. The council expects the new streetlights, which will be turned on the whole night instead of being switched off between midnight to 6:00 Am in the initial proposal, LED panel lighting wholesale will save £20 million in energy costs over a period of 30 years. To complete the project, the council has even approved a streetlight retrofit bank loan.
Other boroughs in UK also have plans of scaling up LED streetlight replacements. The Wokingham Borough Council announced the unanimous approval of investing £11.6 million in new streetlights to cut energy bills, according to a Getreading report. While the Poole Council reported energy bills having doubled over the last decade, Wokingham Borough Council authorities noted streetlight costs have amounted to £600,000 in 2013. An estimated 16,000 streelights will be retrofitted throughout the council, and the council claims at the end of 20 years, the new LED streetlights will be able to save the council £14 million.
Not to be left out, the Thurrock Council recently announced plans of taking a £ 6 million bank loan to overhaul 17,000 streetlights with LEDs, according to a Thurrock Gazette report.
Rising energy costs and LED streetlights lower maintenance costs were the common cited reasons behind UK city councils embrace of LED panel lighting Manufacturer technology. Some cities in UK have chosen to switch off streetlights during certain periods in the night, such as Essex, but as Thurrock Council noted it is not really an option if night time street safety is to be taken into consideration.
more info you can visit:http://www.lead-lighting.com/led-panel/led-panel-light-smd3030-series.htm
HONGFANG is Not A UPRtek Affiliate or Online Distributor
The following concerns a online sales representative, HONGFANG, led street lights price has no legal authorization granted them to market or represent in any manner the product "MK 350" from the company UPRtek, who holds all rights to this product.
It has come to our attention that HONGFANG operates a web site of www.light-test.net, where the product MK350 is being displayed and marketed. No permission, or license to conduct such business has been issued to HONGFANG from UPRtek. Furthermore, we believe HONGFANG might be committing an act of fraud in that they are providing instructions to potential customers for processing payments without actually providing the product.
We would like to state in this letter that we are not responsible in any way for the actions being conducted by HONGFANG and their actions have violated the rights and brand name reputation of UPRtek. In order to protect the rights of any customers misled by HONGFANG into believing them to be the original manufacturer, or an authorized representative of the products of UPRtek; and, to prevent any further damage to our company's reputation, cree xsp series led street light have advised our legal department to initiate an investigation into this matter and to take whatever legal steps are necessary against HONGFANG. Also, we are asking all of our authorized and legal representatives to closely monitor the operations of this company and to constantly remind customers to check and recheck the marketing terms, including the price of any product they are considering and to inquire of their supplier's background.
Should any customer have a question, we encourage them to contact the consumer's hotline provided by UPRtek or listed on our web site at www.uprtek.com/english/ContactUs_03.asp .for more information concerning the legal representatives of our products and how to protect themselves against such business practices as mentioned here that might infringe upon their rights.
more info you can visit:http://www.lead-lighting.com/products/sid106-1.htm
It has come to our attention that HONGFANG operates a web site of www.light-test.net, where the product MK350 is being displayed and marketed. No permission, or license to conduct such business has been issued to HONGFANG from UPRtek. Furthermore, we believe HONGFANG might be committing an act of fraud in that they are providing instructions to potential customers for processing payments without actually providing the product.
We would like to state in this letter that we are not responsible in any way for the actions being conducted by HONGFANG and their actions have violated the rights and brand name reputation of UPRtek. In order to protect the rights of any customers misled by HONGFANG into believing them to be the original manufacturer, or an authorized representative of the products of UPRtek; and, to prevent any further damage to our company's reputation, cree xsp series led street light have advised our legal department to initiate an investigation into this matter and to take whatever legal steps are necessary against HONGFANG. Also, we are asking all of our authorized and legal representatives to closely monitor the operations of this company and to constantly remind customers to check and recheck the marketing terms, including the price of any product they are considering and to inquire of their supplier's background.
Should any customer have a question, we encourage them to contact the consumer's hotline provided by UPRtek or listed on our web site at www.uprtek.com/english/ContactUs_03.asp .for more information concerning the legal representatives of our products and how to protect themselves against such business practices as mentioned here that might infringe upon their rights.
more info you can visit:http://www.lead-lighting.com/products/sid106-1.htm
Cree Reports Financial Results for the Fourth Quarter and Fiscal Year 2014
Cree, a market leader in buy led high bay lamps, today announced revenue of US $436 million for its fourth quarter of fiscal 2014, ended June 29, 2014. This represents a 16 percent increase compared to revenue of US $375 million reported for the fourth quarter of fiscal 2013, and an 8 percent increase compared to the third quarter of fiscal 2014. GAAP net income for the fourth quarter was US $30 million, or US $0.24 per diluted share, an increase of 6 percent year-over-year compared to GAAP net income of US $28 million, or US $0.23 per diluted share, for the fourth quarter of fiscal 2013. On a non-GAAP basis, net income for the fourth quarter of fiscal 2014 was US $51 million, or US $0.42 per diluted share, an increase of 12% year-over-year compared to non-GAAP net income for the fourth quarter of fiscal 2013 of US $46 million, or US $0.38 per diluted share.
For fiscal year 2014, Cree reported revenue of US $1.65 billion, which represents a 19 percent increase compared to revenue of US $1.39 billion for fiscal 2013. GAAP net income was US $124 million, or US $1.01 per diluted share, an increase of 43 percent compared to US $87 million, or US $0.74 per diluted share, for fiscal 2013. On a non-GAAP basis, led high bay light for sale for fiscal year 2014 was US $203 million, or US $1.65 per diluted share, an increase of 31 percent compared to US $155 million, or US $1.32 per diluted share, for fiscal 2013. Cree generated US $319 million of operating cash flow and US $121 million of free cash flow during fiscal 2014.
"Fiscal 2014 was another great year, as we achieved record revenue and grew our non-GAAP net income by over 30 percent," stated Chuck Swoboda, Cree Chairman and CEO. "The strength of our operating model gives us the flexibility to make investments to support our goal to grow the business and increase operating margin. Our new product pipeline, brand momentum and strong balance sheet put us in a great position to enable our long-term customer goal of 100% upgrade to LED lighting."
more info you can visit:http://www.lead-lighting.com/products/sid22-1.htm
For fiscal year 2014, Cree reported revenue of US $1.65 billion, which represents a 19 percent increase compared to revenue of US $1.39 billion for fiscal 2013. GAAP net income was US $124 million, or US $1.01 per diluted share, an increase of 43 percent compared to US $87 million, or US $0.74 per diluted share, for fiscal 2013. On a non-GAAP basis, led high bay light for sale for fiscal year 2014 was US $203 million, or US $1.65 per diluted share, an increase of 31 percent compared to US $155 million, or US $1.32 per diluted share, for fiscal 2013. Cree generated US $319 million of operating cash flow and US $121 million of free cash flow during fiscal 2014.
"Fiscal 2014 was another great year, as we achieved record revenue and grew our non-GAAP net income by over 30 percent," stated Chuck Swoboda, Cree Chairman and CEO. "The strength of our operating model gives us the flexibility to make investments to support our goal to grow the business and increase operating margin. Our new product pipeline, brand momentum and strong balance sheet put us in a great position to enable our long-term customer goal of 100% upgrade to LED lighting."
more info you can visit:http://www.lead-lighting.com/products/sid22-1.htm
Latest Philips Lighting Technology Would Help Realise Aspirations for New Zealand Stadiums
Latest lighting technology would help realise aspirations for New Zealand stadiums Wellington, New Zealand – New Zealand stadiums have the opportunity to become world leaders in pitch lighting, with Philips’ release in New Zealand of LED floodlights as part of its ArenaVision range. “Sports lighting technology has developed considerably in recent years, with led street light with solar panel now able to provide the high lumen output required for high-definition broadcasting standards, while also providing control and flexibility to manage light spillage onto neighbouring roads and properties,” said Gordon Wiffen, General Manager of Philips Lighting New Zealand.
The new ArenaVision LED range provides high quality light output and greater control capabilities than standard metal halide floodlights. ArenaVision LED floodlights also use up to 34.7 percent less energy than ArenaVision metal halide floodlights, while the inherently longer lifetime of LED reduces maintenance with longer periods between lamp changes. Typically, metal halide floodlighting lamps should be replaced every three-seasons to maintain the lighting levels required, whereas the Philips LED system is expected to last in excess of 10 seasons.
ArenaVision LED technology allows a quick re-start compared to the warm-up time of Philips metal halide floodlights, making it faster to continue events in an unforeseen power outage, or switch between optimal lighting configurations for specific sports. The ArenaVision LED control system can also be used to create entertainment lighting effects that would normally require dedicated stage-lighting luminaires. At the push of a button, the user can switch between fixed lighting configurations that fulfil sports codes’ requirements, and pre-programed special lighting effects.
“Lighting is critical for sports venues, not only to give the high definition needed for both players and broadcasters, but also to enhance the sense of spectacle, anticipation and emotion that comes with competitive sports, including giving stadiums that extra ‘wow-factor’ through colourful light displays,” says Wiffen. Philips has already lit up a number of New Zealand sporting venues such as Eden Park, Nelson’s Trafalgar Park and Dunedin’s indoor Forsyth Barr Stadium with its high intensity discharge ArenaVision range. Philips ArenaVision has also lit up major stadiums around the world, such as Old Trafford Stadium, the Guangzhou Olympic Stadium and five of the football stadiums recently used in Brazil.
“With Philips’ ArenaVision led street lighting Manufacturer now successfully implemented in sports stadiums such as Ekinox at Bourg-en-Bresse, France and Chelsea Football Club’s Stamford Bridge, there is an opportunity for New Zealand stadiums to take advantage of the latest developments in lighting technology, which would benefit broadcasters, players, bill payers and spectators alike,” said Wiffen.
more info you can visit:http://www.lead-lighting.com/products/sid106-1.htm
Subscribe to:
Posts (Atom)