LED logo signs act as a general guideline path lighting and landscaping in front of a group doing a particularly good building, a beautiful and stylish and innovative, identification signs, often play a decorative role icing on the cake, set decoration, guidelines, advertising and other functions as one of the logo signs, led high bay light manufacturers has become an important part of outdoor advertising.
Logo signs by morphological classification:
1. Horizontal: The entire length ratio of the horizontal comparison. Generally the entire surface are being used as logo signs. Generally on the wall of the small shops and large buildings can be seen.
2. Vertical: Vertical entire proportion is relatively long. Generally the entire surface are being used as logo signs.
3, the sudden shape: prominent on the wall of the building, except in the entire surface of the back or sides of the wall outside of the case, both sides are being used as an advertising vehicle identification plate. For example three sides signage.
4, ground cylindrical: cross-shaped mark on certain fixed structure on the ground, vertical-shaped, three-dimensional shape of the logo signs.
5, the roof: that set some fixed structure on the roof of a building and hung above or close to the plate-shaped cubic or magic of live logo signs.
Signage By Material:
A smooth logo signs: screen or board oily, very smooth.
2, luminous material identification signs: cards with luminous material (that is, we usually say the neon lights).
3. The quality acrylic logo signs: acrylic material made main board material. For example, "McDonald's quality acrylic signs"!
4, metal logo plate: Under no circumstances specified board, as the main material with a metal plate or text plate surface and metal as the identity of the main carrier.
5, the electro-optical board identification signs: luminous tubes with light-emitting diode or monochrome or color to achieve performance results. Light-emitting diodes and manifestations can be divided into luminous optic panels, LCD, LED, CRT, FDT other five species.
Identification card by using a mesh Category:
At different times: A, Lighting: For day and night use, the installation of in-house logo signs luminous tube or cast spectrometer installed inside and outside the installation of lighting logo signs and so on. B, without lighting: there is no single purpose were used day and night, without any lighting.
Place different: A, Interior: located in the interior, such as the direction of the arrows, and other indoor reception. B, outdoors: in all non-indoor space.
Different purposes: A, Commercial: generally refers to commercial purposes in order to achieve established. B, public: in public places, as announced to the public or to announce some news information.
Cities in the number of cars has increased several hundred vehicles a day, fewer road resources, rational distribution for traffic signs, increase traffic monitoring, one-way street, and the time period limit line so requires signage to remind people: from traffic signs in terms of Note. Convergence between the various transport facilities, the conversion is absolutely not missing signs.
Identification system design cycle and improve oversight mechanisms to select the location of led high bay light for sale of identification system to set rules, regional identity set rules, set rules tourism logo, color design rules, design rule comprehensive service agencies to consider environmental analysis, to understand local culture, local people, building style, city personnel status, road conditions, quality of the people, the regional situation, how many people and so many tourism factors analysis to determine the overall planning of urban identity system, further regional breakdown.
Special emphasis on the layout - Reasonable: distribution; primary and secondary clear fluid: clear distinction; smooth comprehensive step by step: everything comprehensive, exhaustive.
No comments:
Post a Comment